Out of stock

Gameboy MBC3 RTC LinkNLoad USB Flash Cart (Works with Pokemon games/hacks like CC)

$66.00$68.00 USD

The Gameboy MBC3 RTC LinkNLoad is a flash cart which features a USB-C so you can re-program it or backup/restore your save anywhere you go as long as you have a USB cable and a computer. Requires the GBxCart software such as FlashGBX to re-flash it. There is an RGB LED on board that you can set using MBC3 LNL Set RGB Colour (is off by default).

Shell trimming is required for the USB-C connector, if you don’t trim the top half of the cart shell, the cart shell won’t close. You can also trim the bottom shell so the USB-C port is exposed for you to plug in your USB cable.

This cart features the MBC3 chip with RTC which works with Pokemon games such as Gold, Silver, Crystal and hacks such as CC and Prism. It has a 2MB flash chip and 32KB FRAM so no battery is required to retain the save, the battery is only needed for the RTC. Designed and made in Australia.

Comes with a clear reproduction GB cart shell (not trimmed). Looking for other colour cart shells? Check our DMG or GBC high quality cart shell listings. Please note, if you order more than 5+ in one shipment, only 4 will have batteries due to shipping limitations.

SKU: N/A Category:


This cart will fit the following shells – DMG, GBC, Crystal (Japan/USA) and Kirby.

This cart works on every Gameboy system – GB, MGB, GBC, GBA, GBA SP and the Game Boy Player. It also works on the N64 transfer pack for Pokemon Stadium 1 & 2 (as per a user report).

(Prototype cart shown above)

ROM: 2MB Flash
FRAM: 32KB (Data retention of 20-50 years)
MBC: MBC3 original chip

The power consumption of MBC3 when powered from the battery appears to depend on the chip markings which is either around 2.3uA or 5uA so a CR2025 should last at least 2-3 years and a CR2032 should last at least 4-5 years. Only the RTC is powered by the battery so the save is retained if the battery runs dry.

The PCB finish is ENIG.

Additional information

Weight 41 g
Shell trimming

I will do my own shell trimming/filing

Optional cable

None, USB-A to USB-C cable (Black)

Flash carts

Gameboy carts, Low power, MBC3 support, RTC support, Saving supported


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.