Out of stock

Gameboy 1MB 32KB FRAM Mini Flash Cart (fits in a GBA cartridge for GBA/GBA SP)

$27.00

This is a unique Gameboy flash cart which fits inside a GBA repo cartridge so you can play on the GBA and GBA SP without the cartridge sticking out like it does for a regular Gameboy cartridge. Because of that, this cart will only work in the GBA, GBA SP and the Game Boy Player. The GBA repo cart will need to trigger GB mode – we did this with a bit of hot glue on the bottom left side.

Will be loaded with LSDJ Stable 9.2.L, pre-modified with the hot glue method. Need to flash a game on this cart? Make sure to grab our GBxCart Flasher.

Comes in a reproduction clear cart shell. Looking for other colour cart shells? Check our GBA cart shell listing.

This re-programmable Flash Cartridge is MBC5 only which allows you to play most of the later released Gameboy/Gameboy Colour games including some of the Pokemon games (no RTC support), Zelda DX, LSDJ (only 1 song), etc and allows you to re-flash it with any flasher like GBxCart RW. Designed and made in Australia.

Questions? Jump on our Discord server where we and other users can help you or contact us via Twitter.

This cart only fits properly in the GBA, GBA SP and the Game Boy Player. If you can fit it in a DMG, MGB or GBC then it will work too but it won’t fit using the GBA cartridge shell. Games that require more than 1MB of ROM won’t work.

Each unit is assembled in house and is tested on a Gameboy Advance.

SKU: N/A Category:

Description

Works with GB Studio v1.1.0+ with saving if you wish to develop your own game. Check this list of Gameboy games to see the ROM/RAM size and MBC type your game will have, you would be looking for MBC5 games but most MBC3 games should work and some MBC1 games may work.

Special options:
– Custom boot logo which takes 16KB, if your game takes up the full 1MB flash, the last 16KB bank will be overwritten. The custom boot logo works on the GBA 40pin. The original boot logo will appear on these devices: GBA 32pin and GBA SP. Just bridge the far left jumper with solder, you may need to use a little wire.
– 8KB RAM locking useful for MBC1 games like Donkey Kong Country 3. Just bridge the far right jumper with solder.

Specs
ROM: 1MB Flash
FRAM: 32KB (Data retention of 20-50 years)
MBC: MBC5 (with ROM banking range 0x2000 – 0x3000 to allow for some MBC3/1 games)

Most MBC3 games should work.
MBC1 games that won’t work: Any that needs 32KB RAM or requires more than 512KB of ROM.

The PCB finish is ENIG.

(Video of prototype board)

Additional information

Weight 15 g
Product understanding

I understand this is a Gameboy Flash cart which only works on the GBA, GBA SP and Game Boy Player
Flash carts

Custom boot logo, Gameboy carts, GB in GBA cart, GB Studio support, Low power, LSDJ compatible, MBC1 support, MBC3 support, MBC5 support, Saving supported

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.